24/7 Surf Wax Vending Machine

24/7 Surf Wax Vending Machine from Keith Collins on Vimeo.

RETROVOLUTION by Pablo Ballester

RETROVOLUTION from Pablo Ballester on Vimeo.
MIni documentary about the evolution shaping surfboards in QLD, Australia.
Old designs and new materials looking for fun.

Production, directed, photography and edit by Pablo Ballester zitafilms@gmail.com
Thanks to:
Mark Pridmore www.moresurfboards.com
Nigel Jackson www.dabombsurf.com.au
Darryl Homan

Music: The Queen of Hearts by Corizonas
Dirge by Arizona Baby

MOONEYES Yokohama HOT ROD CUSTOM SHOW 2012 Demo Reel

21st Annual YOKOHAMA HOT ROD CUSTOM SHOW 2012

SUNDAY Dec.2,2012
at Pacifico Yokohama

Official Website
http://yokohamahotrodcustomshow.com/

SLIDEtracked

SLIDEtracked from dank VIBES on Vimeo.
I am landlocked. Sometimes I get pretty SLIDEtracked...

check out my music site http://dankVIBES.com

shot and edited by RADamson

surfing by Kameron Brown, JJ Wessels, Tegan Gainan and Justin Quintal

song: MP(Zeds Dead)- "It's Easy"

Tyler's 11' Super Chief

Tyler is creating this new 11' super chief.

Layin down the gloss!

in, The Big Slide

Mundaka "al cuadrado"

Mundaka al cuadrado from aritzaranburu.com on Vimeo.
This is Mundaka as square as it gets. The swell wasn´t big. Actually the barrels had more width than height.

Dan Malloy and Dane Reynolds Board Swap

Ride shotgun with Dan Malloy and Dane Reynolds as they cruise from their Ventura homes to Emma Wood State Beach for a quiver swap. This insider look at their modes of surfing comes to a head as they trade—and ride—everything from homemade hunks to foiled Fryes. TSJ party members know full-well Malloy's open-minded approach, via articles like "Mar y Tierra" (TSJ 16.4) and "The Present" (TSJ 18.2).

http://www.surfersjournal.com/video

Experimental Bing Model

Test run of a new Bing Surfboards model shaped by Matt Calvani with team rider, Mick Rodgers.

JOEL TUDOR INVITATIONAL | Biarritz by Smog Films

JOEL TUDOR INVITATIONAL - Biarritz from Smog Films on Vimeo.
I was just here for the day one of the Joel Tudor invitational to proudly shoot my French homies Clovis and Robin on their own spot ! Amazing to watch all these guys surfing at the "Côtes des Basques".
Got The blues editing this Clip, i wanted to see more !
Thanks Joel and Vans for this event and Wes Montgomery whose music fits perfect in the mood :)
Peace
Jean /

The masterpiece music is Body and Soul from Wes Montgomery.

There's some Photos on http://jeanpenninck.tumblr.com

La Belle Pig | Retro Movement

in, Retro Movement

DIY Surfboard Bike Rack | Surf Sufficient

DIY Surfboard Bike Rack - Surf Sufficient from www.KORDUROY.tv on Vimeo.
For those who travel around town by bicycle, they know riding with a surfboard under the arm can be cumbersome and awkward. In this episode of Surf Sufficient, our friend Travis Newhouse helps make that bike commute to the beach much sweeter. By adding a surfboard rack to your rig, your shred sled can be stowed comfortably as you head out for a stoke.

These instructions are a guideline. Each bike and surfboard are different. Be sure to measure your own bike and surfboard, and dry-fit the pieces before you glue them together. We want you to have a safe ride to the beach - make sure the rack will not inhibit your movement on the bike, and that your front tire can turn freely without contacting the surfboard.

Materials:
4 - 1" PVC T-joint
6 - 1" PVC 90 degree elbow
4 - 1.75" diameter hose clamps
10' PVC pipe (Schedule 40)
6' foam pipe insulation for 1" pipe
PVC cement
bungee cords

Tools:
hacksaw
sandpaper or file
measuring tape
flathead screwdriver

Instructions:
1. Measure the diameter the bike's seat tube and down tube.
2. Transfer measurement to the opening at the top of the T-joint, and cut off the top of the T-joint.
3. Place one T-joint on the bike near enough to the pedal to measure the distance to the outside of the pedal. Include enough clearance for your foot, but shorter distance will result in a stronger rack. On this bike, the distance was 8.5 inches.
4. Attach T-joints to bike with hose clamps. For now, tighten only enough to remain in position.
5. Cut 2 pieces of PVC pipe to the length measured in Step 3. Clean up the ends of the cuts with sandpaper or a file. Insert PVC pipe pieces into T-joints.
6. Install two 90* elbows onto PVC pipes, with opening facing the ground.
7. Cut two 3" pieces of PVC pipe, and insert into 90* elbow.
8. Install T-joints onto short pieces such that the openings are facing each other.
9. Determine the length of the crossbeam by measuring distance between the T-joints. Be sure to include 1" at each end for the portion of the pipe that fits into the joint. Cut PVC pipe to length for the crossbeam, and insert the crossbeam into the T-joints.
10. Cut two 11" pieces of PVC pipe, and insert into the ends of the T-joints that face the ground. The suggested length is to fit most surfboards and bikes. Make sure the rack will not extend too close to the ground.
11. Install 90* elbow at the bottom of the pipe, with its opening facing away from the bike.
12. Measure the thickness of your surfboard. Be sure to consider the bulk of a travel bag, if you use one. Add approximately 1/2" for the thickness of the foam padding. Cut two pieces of PVC pipe to length, and insert into the opening of the 90* elbow.
13. Install 90* elbows on the ends of each short piece, with opening facing up.
14. Cut two 12" pieces of PVC pipe, and insert into the 90* elbows. The length of this piece should be less than the width of the board when mounted in the rack. This will ensure the bungee cord can hold the board in the rack.
15. With all the pieces dry-fit, check the fit of your board in the rack.
16. Before disassembling, mark the alignment of pipes and joints that extend out from the bike. Draw a line on the pipes and the T-joints attached to the bike, and also at the top 90 degree elbows.
17. Glue the pipes to the T-joints attached to the bike. Be sure to align the marks made in Step 16.
18. Glue the 90 degree elbows to the pipes extending from the bike. Be sure to align the marks made in Step 16.
19. On a flat surface, glue remaining two T-joints to the crossbeam. Use the flat surface to ensure the T-joint are aligned in the same plane. Also, glue the two 3" pieces into the T-joints.
20. Glue the crossbeam into 90* elbows.
21. Glue the 11" pieces of PVC pipe into the bottom of the T-joints.
22. Continue to glue pieces: 90* elbow followed by short piece of pipe, then another 90* elbow, and finally the 12" vertical piece.
23. Attach the foam insulation to the rack.
24. Drill holes for the bungee cords. Ensure that the holes are low enough to avoid metal hooks contacting the surfboard.
25. Enjoy your ride to the beach!

Hot and Glassy | Sea Movies

Hot and Glassy - Sea Movies from www.KORDUROY.tv on Vimeo.
Cyrus gets a few clean ones on his Aquatic Almond (http://lifeisjustswell.com/2011/surfboards/cys-aquatic-almond/) on a humid October afternoon near Korduroy Headquarters in San Diego, California.

Double Deuce by Tyler Hatzikian

in, Tyler Surfboards

Board Buliding At The Deus Temple with Ryan Burch

Board Buliding At The Deus Temple with Ryan Burch from Deus ex Machina on Vimeo.

Deus Ex Machina by Seth C Brown

Deus Ex Machina from Seth C Brown on Vimeo.
The tale of a man building the most beautiful, but most dangerous machine.

***Note for audio - Laptop speakers miss out on most low end sound effects. If you have headphones, they help!

Grain Surf Re-evolution

Grain Surf Re-evolution from Bridge to Shore Films on Vimeo.
Short edit from our time at Grain Surfboard's second annual Surf Re-evolution event.

Joel Tudor Duct Tape Invitational | Day 2 Highlights

Joel Tudor Duct Tape Invitational: Day 2 Highlights from Vans Europe on Vimeo.
The 6th edition of the Joel Tudor Duct Tape Invitational presented by Vans took place this weekend at legendary surf spot "La Côte des Basques" in Biarritz; the epicenter of French surfing. Two-time world longboard champion Joel Tudor gathered 16 of the best longboarders in the world to showcase their uniquely progressive surf style for a prize purse of $10,000, riding single fin leashless boards with impeccable style and moves to inspire the next generatio

Joel Tudor Duct Tape Invitational | Day 1 Highlights

Joel Tudor Duct Tape Invitational: Day 1 Highlights from Vans Europe on Vimeo.
The 6th edition of the Joel Tudor Duct Tape Invitational presented by Vans took place this weekend at legendary surf spot "La Côte des Basques" in Biarritz; the epicenter of French surfing. Two-time world longboard champion Joel Tudor gathered 16 of the best longboarders in the world to showcase their uniquely progressive surf style for a prize purse of $10,000, riding single fin leashless boards with impeccable style and moves to inspire the next generation.

Wavegliders | Work in Progress

in, Wavegliders

Uma no Cravo e outra no Surf

Uma no Cravo e outra no Surf from Hélio Valentim on Vimeo.
A surf story about freedom and friendship, history and life, about the fellling of being free...and about free soul surf!
The short movie is a documentary with the finnest and first great Portuguese Surfer and Waterman (Pedro Martins de Lima), and also a fiction of some friends (Wavegliders family) that celebrates in reunion around the fire in a beautifull beach, the freedom after the day of the 25's Abril revolution in 1974 in Portugal that ended with an opressive regime.
It's a freedom surfer celebration...